NO
NN
Enable AutoSense®
Disable AutoSense®
To use this mode of operation properly, the user must first attach the plastic scanner holder to the bracket of the stand as shown in Figure 1. The (NO) Enable AutoSense® programming symbol is scanned until the green “Good Decode” light blinks. This will acti- vate the trigger screen. The scanner is then placed into the holder and the user must check that the red laser beam is aimed at the reflective label affixed to the stand. The AutoSense® is now ready to read labels presented to it.
Figure 1. The PSC AutoSense® Stand
a. | Riser | d. | Reflective tape |
b. | Scanner holder | e. | Stand base |
c.Scanner
6 | User’s / Programming Guide |
