BE
Enable 4 Times Laser Redundancy
Laser Timeout
The scan beam will activate in response to a trigger pull. The beam will automatically deactivate after a label is decoded. If a label is not decoded., the scan beam will timeout and deactivate after several sec- onds. Scan the following labels to control the length of the timeout.
BH
BI
BJ
BO
BW
Set Scan Beam *#@ Timeout to 6 Seconds
Set Scan Beam Timeout to 4 Seconds
Set Scan Beam Timeout to 2 Seconds
Set Scan Beam Timeout to 1 Second
Set Scan Beam Timeout to ½ Second
Beeper Operation
Scan one of the options below to modify beeper operation.
AA
Beeper Off
AB
Beeper On; Volume Low
24 | User’s / Programming Guide |
