Datalogic Scanning DS1100 SH2347, DS2200 SH2348 manual Maintenance, Cleaning, Inspection

Maintenance

PSC Scanners are designed to provide trouble-free operation throughout their lives. They contain no components that require peri- odic maintenance. Optimum performance may be ensured by follow- ing the preventive maintenance procedures suggested below. If scanning performance declines, please follow these procedures.

Cleaning

A dirty scan window can impair scanning performance. When the window appears to be dirty or smeared, clean it by wiping with a slightly damp cloth or facial tissue. Water or a suitable cleaning solu- tion such as Windex™ may be used on the cloth. The plastic case of your scanner can also be cleaned in this manner.

Never use solvents (e.g., alcohol) on the enclosure; they

may damage the finish of the scanner.

NOTE

Inspection

Periodically inspect scanner cords and cables for wear and other signs of damage which may interfere with the proper operation of the unit. A badly worn cord or cable should be replaced immediately. Replacement cords and cables can be obtained by contacting your PSC Customer Service Representative.

Routinely examine scanners for signs of damage. A badly dented enclosure may cause interference with internal components resulting in damage to, or malfunction of the unit. Units with damage to the enclosure should be returned to the factory for repair. Please refer to Service and Warranty Section.

06656 67