Product Reference Guide 275
Appendix B

Standard Defaults

The most common configuration settings are listed in the “Default” column of Table 37.

The settings in this table are as applied to a standard RS-232 interface. See Table 38 for

a listing of default exceptions to this list as appled to other interface types. Page references

are also provided for feature descriptions and programming barcodes for each parameter.

A column has also been provided for recording of your preferred default settings for these

same configurable features.

Table 37. Standard Defaults
Parameter Default Your Setting Page Number
General Features
Double Read Timeout 0.4 Second 17
Label Gone Timeout 160 ms 19
Sleep Mode Timeout Disable 21
Sleep Mode Timeout Disable 21
Power On A lert 4 Beeps 23
Good Read: When to Indicate After Decode 24
Good Read Beep Type Mono 25
Good Read Beep Frequency Medium 26
Good Read Beep Length 80 ms 26
Good Read Beep Volume High 28
Good Read LED Duration LED on until
next trigger pull 29
Scan Mode Trigger Single 31
Scanning Active Time 5 Seconds 35
Flash On Time 1 Second 37
Flash Off Time 600 ms 39
Stand Mode Sensitivity Medium 41