Laser Pointer Period

Laser Pointer Period

This option specifies the period of the laser pointer blink during scanning. The laser pointer will be activated for the time specified by Laser Pointer Control. then start blinking OFF then ON at 50% duty cycle for the duration set by Laser Pointer Period.

ENTER/EXIT PROGRAMMING MODE

Laser Pointer Period = Disable

DEFAULT

Laser Pointer Period = 500 ms

Laser Pointer Period = 1 Second (1,000 ms)

Laser Pointer Period = 1.5 Seconds (1,500 ms)

Laser Pointer Period = 2 Seconds (2,000 ms)

Product Reference Guide

43

Page 51
Image 51
Datalogic Scanning PD7100 manual Laser Pointer Period = Disable