2

SC6000

2 INSTALLATION

To install the system follow the given procedure:

1)Select the mounting location and mount the SC6000 Controller;

2)Mount the PWO (refer to the PWO Installation Manual);

3)Proceed with system electrical connections;

4)Install the GENIUS™ program on the configuration PC.

If your system requires the SC6000 to be connected to PWO refer to the Reference Documentation section for details.

NOTE

2.1 PACKAGE CONTENTS

Verify that the SC6000 Controller and all the parts supplied with the equipment are present and intact when opening the packaging; the list of parts includes:

•SC6000 Controller

•Installation Quick Reference

•SC6000 Configuration CD-ROM

•Mounting brackets with knobs and washers

Figure 7 - SC6000 Package Contents

4