4

SC6000

In case of SC6000 failure proceed as follows:

Figure 33 - Removing the Compact Flash

1.Disconnect the device

2.Remove the rubber cover of the Compact Flash slot using a screwdriver

3.Remove the Compact Flash

4.Connect a new SC6000 to the system

5.Insert the Compact Flash card

CAUTION

Make sure not to insert the Compact Flash card upside down. Carefully insert it in the guides, so that it will not fall inside the device. Gently push it into the slot.

6. Start up the system

The system configuration is automatically restored and the reading station is ready to start working again.

32