2

SC6000

2.3 MECHANICAL MOUNTING

To mount the SC6000 Controller on the reading station frame proceed as follows:

1Mount the bracket on the reading station frame: the slots on the bracket will help obtain the best positioning. When working in environments characterized by strong vibrations, set the screws as close as possible to the bracket edges, see Figure 10.

2Tighten the ST-222 bracket to the reading station frame using the screws and washers.

Figure 10 - Mounting the bracket on the reading station frame

3Position the SC6000 Controller at the top of the bracket: make sure the two large round openings coincide to the ones located at the edges of the SC6000 Controller.

4While supporting the SC6000 Controller, rotate the whole device until it is aligned for the best viewing position, then insert the set pin screw with locking washer until it inserts into one of the small positioning holes located on the terminal bracket.

Set pin screw

Figure 11 - SC6000 Controller Side View with Punched Steel Ring and Relative Set Pin Screw

6