SOFTWARE CONFIGURATION

3

3 SOFTWARE CONFIGURATION

3.1 GENIUS™ INSTALLATION

Geniusis a new Datalogic scanner configuration tool providing several important advantages:

Multi-language version;

Defined configuration directly stored in the device;

Communication protocol independent from the physical interface allowing to consider the device as a remote object to be configured and monitored.

To install Genius™, proceed as follows:

1)Turn on the PC that will be used for configuration (Windows 95/98 or NT);

2)Insert the Genius™ CD-ROM;

3)Wait for the CD to autorun and follow the installation procedure.

When running Genius™, the procedure for setting the parameters is supported by a help on- line, which is displayed in an HTML browser. It can be selected from the Configuration Help option available in the Help menu. In addition, a context-sensitive help can be enabled by pressing the <F1> key after selecting the desired parameter.

3.2GUIDE TO RAPID CONFIGURATION FOR DS6000, DS8100A AND DX8200A SLAVE SCANNERS

1.Run Genius™ from the configuration PC. The following window appears asking to select the configuration mode.

Figure 26 - Genius™ Wizard Opening Window

Select Advanced. The Wizard option is not currently available for SC6000.

17