3.4Flash Memory Expansion

The printer can be equipped with an optional Flash Memory Expansion. This flash expansion can be used for storage of label formats and fonts. For font downloading instructions refer to Section 5.8 in this manual.

To install the Flash Memory Expansion:

ŒTurn the power off and unplug the printer.

Remove any installed media from the printer.

Using a coin, flathead screwdriver, or similar object, insert it into the Slot on the underside of the printer and gently pry the Expansion Cover off the printer.

Ž With the Flash Memory

Expansion Assembly oriented as shown (connector down), gently insert it into the Expansion Bay until the assembly is firmly seated.

Note: When using a blank expansion module for the first time the printer will automatically format it when the printer is powered up. This initial format can take up to one minute.

E-4203/E-4204/E-4304

13

Page 23
Image 23
Datamax E-4304 manual Flash Memory Expansion