Approved Media
To achieve optimum print quality and maximum printhead life, Datamax recommends the use of DATAMAX® brand media and ribbons. These supplies are specially formulated for use in our printers; use of
For a current list of approved media and ribbons for use in direct thermal and
|
| G |
|
|
|
| F |
|
|
| I |
|
|
|
|
| H |
|
|
| J |
| D |
|
| E |
|
| |
|
|
|
| |
|
| A | C |
|
|
|
|
| |
|
| B |
|
|
Designator | Description |
| Maximum* | Minimum* |
A | Label width |
| 4.09 | 1.00 |
B | Backing width | 4.30 | 1.00 |
C | Gap between labels | .25 | .10 |
D | Label length | 24*** | .375**** |
E | Total thickness | .010 | .0025 |
F | Notch opening width | .50 | .20 |
G | Distance from the edge of the media to the media | .175 | .125 |
| sensor aperture (left justified) |
|
|
H | Reflective mark width** | 4.10 | .50 |
I | Distance between reflective marks | 24*** | .375***** |
J | Reflective mark length | .25 | .10 |
*Units of measure are in inches.
**The reflective (black) mark must be carbon based, placed on the backside of the stock, and the reflectance shall be less than 10% at wavelengths of 950 and 640 nm.
***The label length may vary up to 99 inches with printable area not exceeding the maximum label length.
****This distance is inclusive of the minimum gap between labels.
*****This distance is inclusive of the minimum reflective mark.
| 53 |
