Skips every other label
(Print quality is good but skips every other label).
∙The label is formatted too close to the top edge of the form. Leave white space equal to
∙The media is not calibrated, (see Chapter 4)
∙The media sensor or media sensor circuitry may be defective, call for service.
Unable to print in rotation 4
∙The characters are formatted outside the dimensions of the label. Check that the row/column values provide enough room for the height of the characters or bar code to be printed.
Prints light on the right side of the label
∙The media width adjustment thumbwheel is set for a narrower media width than the actual media being used, (see Chapter 5).
∙The printhead is not properly aligned, call for service.
∙The printhead is not locked down.
Printer fails to turn on
∙A fuse may be blown, call for service.
∙Faulty AC cord, replace
∙A bad power switch may exist on the printer, call for service.
∙A faulty AC wall outlet.
48 |
|