5.0 Introduction
This chapter covers the cleaning, adjusting, and some troubleshooting tips involved with your printer. In addition, the following table provides a recommended cleaning schedule for the various parts of your printer.
Area | Method | Interval |
Printhead | Turn off the printer before cleaning | After every roll |
| the printhead. Use solvent* on a | of media. |
| cotton swab to clean the printhead |
|
| from end to end. |
|
Platen Roller | Turn the power off. Rotate the | After every roll |
| platen roller and clean it thoroughly | of media. |
| with solvent* and a cotton swab. |
|
Rotate the | After every roll | |
Roller | it thoroughly with solvent* and a | of media. |
| cotton swab. |
|
Media Path | Solvent* | After every roll |
|
| of media. |
Peel/Tear Bar | Solvent* | As needed |
Media Sensor | Air blow | Monthly |
Exterior | Mild detergent or desktop cleaner. | As needed |
Interior | Brush or vacuum cleaner | As needed. |
* Recommend using a solvent that contains isopropyl alcohol.
Warning: Isopropyl alcohol is a flammable solvent, always take the proper precautions when using this solvent.
| 38 |
