Datamax E-4304 manual Interface Connection, Interface Cables

3.1.2 Interface Connection

The printer can be connected to the host via a serial or parallel cable.

3.1.3 Interface Cables

An interface cable is necessary to connect the printer to the host. The interface between the printer and the host will be either a serial RS-232C or parallel cable. Cable configurations for serial (RS-232C) interfaces are shown below, (contact your reseller for part numbers and ordering information).

Part# 32-2300-01

Part# 32-2301-01

The printer can also be connected to the host with a parallel connection. In addition, the printer has a unique feature where if you connect both the serial and parallel cables to the printer at the same time, the printer will automatically interface to the first connection, (serial or parallel) that transmits valid data. After a connection has been made, the printer must be turned off and then back on again to change the interface connection.

8 E-4203/E-4204/E-4304