| 5.5 | Printhead Replacement |
|
|
|
| |
| Removal: |
| |
|
|
|
|
| Note: | It is not necessary to remove the Ribbon Handler Assembly, (if |
|
|
| equipped). An access hole in the assembly is provided for access. |
|
|
|
|
|
| Note: | Always follow proper ESD (Electro Static Discharge) procedures when |
|
|
| replacing the printhead. |
|
1. Turn off the printer.
2. Loosen the Printhead Screw until it is free from the printhead.
Carefully unlatch the printhead carrier assembly and remove the printhead.
3. Remove the printhead cables from the back of the printhead.
Replacement:
1. Connect the printhead cable to the new printhead.
2. Position the printhead on the printhead carrier assembly and tighten the printhead screw.
3. Ensure that the printhead cable is not pinched and that the Printhead is clean.
| 43 |
