Dell 1000 owner manual

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the Product

Information Guide.

3Slide the hard drive out of the computer.

4Remove the new drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

5Slide the hard drive into the bay until it is fully seated.

6Replace and tighten the hard drive screws.

7Install the operating system for your computer. See "Restoring Your Operating System" on page 104.

8Install the drivers and utilities for your computer. See "Reinstalling Drivers and Utilities" on page 101.

Returning a Hard Drive to Dell

Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.

2

1

116

1 foam packaging 2 hard drive

Adding and Replacing Parts