Wireless Mini-Card

If you ordered a Mini-Card with your computer, the card is already installed.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

1Follow the procedures in "Before You Begin" on page 111.

2Remove the hinge cover. See "Hinge Cover" on page 122.

3Remove the keyboard. See "Keyboard" on page 123.

4If a Mini-Card is not already installed, go to step 5. If you are replacing a Mini-Card, remove the existing card:

a Disconnect the two antenna cables from the Mini-Card.

1

2

1 Mini-Card

2

antenna cable connectors (2)

Adding and Replacing Parts

125

Page 125
Image 125
Dell 1000 owner manual Wireless Mini-Card, 125