1

2

1

hinge cover

2

scribe

Replacing the Hinge Cover

1Replace the media control buttons connector to the systemboard.

2Insert the left edge of the hinge cover.

3Press from left to right until the cover snaps into place.

4Replace the two screws that secure the hinge cover from the battery bay.

Keyboard

For more information about the keyboard, see "Using the Keyboard and Touchpad" on page 39.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

140

Adding and Replacing Parts

Page 142
Image 142
Dell 1525, 1526 owner manual Keyboard, Replacing the Hinge Cover, 140