Dell 1526, 1525 owner manual Flash Cache Module, Replacing Mini-Card, Removing the FCM, 149

Replacing Mini-Card

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.

NOTICE: To avoid damage to the Mini-card, never place cables under the card.

1Insert the card connector into the system board connector at a 45-degree angle.

2Press the other end of the card down into the slot on the system board until the card clicks into place.

3Replace the securing screw.

4Connect the cables to the Mini-Card, ensuring that you route the cables correctly.

NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini Card.

5Secure unused antenna cables in the protective mylar sleeve.

6Replace the cover and tighten the eight captive screws.

Flash Cache Module

The Flash Cache Module or FCM, is an internal memory card that helps improve the performance of your computer. The FCM card is also known as Intel Turbo Memory and the Intel Flash Cache Logic Chip Mini-card.

NOTE: This card is only compatible with the Microsoft Windows Vista™ operating system and Intel platform.

If you ordered an FCM with your computer, it is already installed.

Removing the FCM

1Follow the procedures in "Before You Begin" on page 133.

2Turn the computer over and remove the cover on the Mini Card compartment.

3Ground yourself by touching one of the metal connectors on the back of the computer.

NOTE: If you leave the area, ground yourself again when you return to the computer.

Adding and Replacing Parts

149