3Align the cutout on the bottom of the card with the crossbar in the system board connector. Gently rock the card into the connector until it is fully seated.

card

card cutout

card connector on system board

crossbar

Ensure that the card is fully seated and that its bracket is within the card slot.

not fully seated card

fully seated card

bracket

 

 

within slot

bracket caught outside of slot

4Secure the card bracket with the screw you removed in step 2.

5Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

58

Removing and Installing Parts

Page 58
Image 58
Dell 3000 manual Card Card cutout, Not fully seated card Fully seated card Bracket