Dell 3000 manual Drive Alignment screws, Drive Securing screw

2Remove two extra alignment screws, shown in the illustration on page 72, from the front of the computer and insert them into the drive.

drive

alignment screws (2)

NOTE: Some computers come with only two extra alignment screws; others come with four. You only need two alignment screws for this procedure.

3Gently slide the drive into place in the drive bay.

drive

securing screw

extra alignment screws (2 or 4)

alignment screws (2)

4After the drive is in place, apply pressure to ensure that the drive is fully seated.

5Use the securing screw that came with the drive to attach the drive to the computer.

72

Removing and Installing Parts