w w w . j p . d e l l . c o m s u p p o r t . j p . d e l l . c o m
Adding Other Cards
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 9.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE: You must use
The computer’s card connectors allow you to install different types of devices such as modems and network adapters.
1 Shut down the computer (see page 34).
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
2 Turn off any attached devices and disconnect them from their electrical outlets.
3 Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4 Remove the computer stand (see page 21).
5 Open the computer cover (see page 80).
6 Press the lever on the retention arm and raise the retention arm.
86
