44 Setting Up and Using Your Computer
www.dell.com | support.dell.com

Swapping Devices While the Computer

Is Running

NOTICE: To prevent damage to the docking connector, do not remove or
replace devices while the computer is connected to a docking device.
1Double-click the Unplug or Eject Hardware icon on the taskbar.
2Click the device you want to eject.
3Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
4Slide and hold the latch release, and pull the device out of the bay.
5Insert the new device into the bay, and push it until you feel a click.
6If necessary, enter your password to unlock your computer.

Using the Keyboard and Touch Pad

Dellâ„¢ AccessDirectâ„¢ Buttons

1H018bk3.book Page 44 Monday, October 14, 2002 2:26 PM