Dell 8200 owner manual Adding and Replacing Parts 107

Models: 8200

1 162
Download 162 pages 52.76 Kb
Page 107
Image 107

securing clip

memory module

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “JDIM (DIMMA)” before you install a module in the connector labeled “JDIM2 (DIMMB).”

8Ground yourself and install the new memory module:

a Align the notch in the module with the slot in the center of the connector.

b Slide the edge of the module firmly into the connector, and rotate the module down until you feel a click. If you do not feel the click, remove the module and reinstall it.

9Replace the cover and screw(s).

NOTICE: If the memor y module cover is difficult to close, remove the module and reinstall it . Forcing the cover to close may damage your computer.

HINT: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure.

Adding and Replacing Parts

107

Page 107
Image 107
Dell 8200 owner manual Adding and Replacing Parts 107