6. Press the Disc button and the printer tray comes out. If the tray does not come
out, go to page 31 for help.
7. Manually rotate the leadscrew counterclockwise to lower the picker down to the
printer tray. The leadscrew can only be rotated if the picker motor is not
energized. Do not press the operator button on the autoloader! If the leadscrew
cannot be rotated, refer to “Releasing Picker Motor Energy” section on page 31.
If the printer tray was moved during the alignment, you must run the tray in and
out again.
8. If the picker fingers are not centered over the hole of the disc, alignment is
necessary.
Installation 28