Dell CDPR3 Operator Panel , Operator Button

Operator Panel

The Desktop 4500 has an Operator Panel located on the right side of the autoloader.

The following Status Lights (LEDs) provide you with operational information.

Power LED

The green Power LED lights whenever the power switch is on.

Active LED

The yellow Active LED lights when there is communication through the autoloader

control port.

Mode LED

The yellow Mode LED lights when the button diagnostic function is selected.

Button LED

The yellow Button LED, located in the operator button, is lit when the autoloader is

paused. It may also be lit during the button diagnostics. Directions for the Desktop

4500 button diagnostics may be downloaded from the service procedures on the

Rimage Technical Web site.

1 – Power LED 3 – Mode LED 5 – Operator Button

2 – Active LED 4 – Button LED

The operator button may be used to pause the Desktop 4500 from processing discs.

Pausing the autoloader is used so the operator can add and remove discs from

carousel, or change ink cartridges. The carousel rotates each time the operator pauses

the autoloader. To pause the Desktop 4500, press the operator button. To return to

normal operation mode, press the operator button again. When the button LED is on

and the mode LED is off, the autoloader is in the paused mode.

33 User Guide Reference