Dell DR4100 owner manual Hard-Drive Indicator Patterns, PCIe indicator Condition, Error, Off

PCIe indicator

Condition Corrective Action

The indicator blinks Restart the system. Update any required drivers for the PCIe card. amber if a PCIe card Re-install the card. If the problem persists, see Getting Help. experiences an

error.

Hard-Drive Indicator Patterns

The following topic describes the hard-drive indicator patterns of the Dell DR4100 system.

Figure 2. Hard-Drive Indicators

1.hard-drive activity indicator (green)

2.hard-drive status indicator (green and amber)

NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) does not function and remains off.

Drive-Status Condition

Indicator Pattern

(RAID Only)

Blinks green two Identifying drive or preparing for removal times per second

Off Drive ready for insertion or removal

NOTE: The drive status indicator remains off until all hard drives are initialized after the system is turned on. Drives are not ready for insertion or removal during this time.

Blinks green, amber,	Predicted drive failure
and off
Blinks amber four	Drive failed
times per second
Blinks green slowly	Drive rebuilding

10