Dell DR4100 PSU0033 Message, PSU0034 Message, PSU0035 Message, PSU0036 Message, PSU0037 Message

Error Code	Message Information
PSU0033	Message	The temperature for power supply <number> is outside of the
		allowable range.
	Details	System performance may be degraded.
	Action	Check the system operating environment, including airflow and inlet
		temperature. Check system logs for temperature and thermal
		component failures.
PSU0034	Message	An under voltage fault detected on power supply <number>.
	Details	This failure may be the result of an electrical issue with cables or
		subsystem components in the system.
	Action	1. Remove and reinstall the power supply.
		2. Check cables and subsystem components in the system for
		damage.
		3. If the issue persists, see Getting Help.
PSU0035	Message	An over voltage fault detected on power supply <number>.
	Action	Check input power or reinstall the power supply. If the issue persists,
		see Getting Help.
PSU0036	Message	An over current fault detected on power supply <number>.
	Details	This failure may be the result of an electrical issue with cables or
		subsystem components in the system.
	Action	1. Remove and reinstall the power supply.
		2. Check cables and subsystem components in the system for
		damage.
		3. If the issue persists, see Getting Help.
PSU0037	Message	Fan failure detected on power supply <number>.
	Action	Check for fan blockage. If the problem persists, see Getting Help.
PSU0076	Message	A power supply wattage mismatch is detected; power supply
		<number> is rated for <value> watts.
	Details	Power supplies should be of the same input type and power rating.
	Action	Install matched power supplies and review this manual for proper
		configuration.

112