Dell J740 owner manual Basic printing, Printing photos

Before you begin printing, see the information below about how much paper the printer exit tray can hold.

The printer paper exit tray can hold:

• 150 sheets of paper		• 10 envelopes
•	25 sheets of labels	•	50 cards
•	1 transparency	•	1 sheet of coated, photo, or glossy paper

NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and photos may require up to 15 minutes to dry.

Printing

Basic printing

1Load paper. For help, see page 7.

2 With your document open, click File → Print.

3To change the printer settings, click Properties, Options, Setup or Preferences (depending on the program or operating system).

The Print Properties dialog box appears.

4On the three tabs along the left side of the Print Properties screen (Quality/Copies, Paper Setup, and Print Layout), confirm the selections.

NOTE: To see details about a setting on the Quality/Copies, Paper Setup, or Print Layout tabs, right-click the setting on the screen, and then select the What’s This? item.

5Click OK or Print (depending on the program or operating system).

NOTE: If you are using plain A4 or letter size paper, and you want to print with normal quality, you do not need to adjust the settings.

If you are using specialty media, follow the steps for your paper type.

Printing photos

1 Click Start → Programs → Dell Printers → Dell Inkjet Printer J740 → Dell Printer Solution Center.

2Click the How To tab.

3From the Projects drop-down dialog box, select Photos.

4Click View and follow the instructions to print your photograph.

Using the printer

9