027 027
/
CHAPTER 6: COIN-CELL BATTERY
1
2
1 coin-cell battery cable connector 2 coin-cell battery
Removing the Coin-Cell Battery
Follow the instructions in “Before You Begin” on page 1. 6.
Remove the battery pack (see “Removing the Battery Pack” on page 2. 11).
Remove the compartment door (see “Removing the Compartment Door” on 3.
page 14).
e coin-cell battery is glued to the computer base, use a plastic scribe to 4.
pry it o the computer base.
Disconnect the coin-cell battery cable from the system board connector.5.
Replacing the Coin-Cell Battery
Follow the instructions in “Before You Begin” on page 1. 6.
Connect the coin-cell battery cable to the system board connector.2.
Use the adhesive on the coin-cell battery and adhere it to the computer 3.
base.
Replace the compartment door (see “Replacing the Compartment Door” on 4.
page 14).
Replace the battery pack (see “Replacing the Battery Pack” on page 5. 11).
CAUTION: Before turning on the computer, replace all screws and
ensure that no stray screws remain inside the computer. Failure to do
so may result in damage to the computer.