048 048
/
CHAPTER 11: WIRELESS MINI-CARD(S)
1
2
3
4
1 system board connector 3 securing clips (2)
2 full Mini-Card 4 antenna cable
Remove the full Mini-Card from the system board connector.9.
CAUTION: When the full Mini-Card is not in the computer, store it in
protective antistatic packaging. For more information, see “Protecting
Against Electrostatic Discharge” in the safety information that shipped
with your computer.
Removing the Full Mini-Card
Follow the instructions in “Before You Begin” on page 1. 6.
Remove the battery pack (see “Removing the Battery Pack” on page 2. 11).
Remove the compartment door (see “Removing the Compartment Door” on 3.
page 14).
Remove the hard drive (see “Removing the Hard Drive” on page 4. 17).
Remove the memory module(s) (see “Removing the Memory Module(s)” on 5.
page 21).
Remove the palm rest (see “Removing the Palm Rest” on page 6. 38).
Disconnect the blue antenna cable from the full Mini-Card.7.
Push out the securing clips until the full Mini-Card pops up.8.