Display Hinge Cover
Removing the Display Hinge Cover
1.Follow the instructions in “Before You Begin” on page 6.
2.Remove the display assembly (see “Removing the Display Assembly” on page 73).
3.Remove the five screws that secure the display hinge cover to the display assembly.
4.Pry the display hinge cover up with a plastic scribe.
| 3 |
|
| 2 |
|
|
| 1 |
1 | screws (5) | 3 display assembly |
2 | display hinge cover |
|
CHAPTER 17: DISPLAY
Replacing the Display Hinge Cover
1.Follow the instructions in “Before You Begin” on page 6.
2.Route the antenna, display, and camera cables through the display hinge cover.
3.Align the screw holes on the display hinge cover with the display back cover.
4.Replace the five screws that secure the display hinge cover to the display assembly.
5.Replace the display assembly (see “Replacing the Display Assembly” on page 75).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
076/076
