Dell MD3200, MD3220 Naming or Renaming Storage Arrays, Name/Rename Storage Arrays dialog appears

A confirmation message is displayed.

4Click OK.

Naming or Renaming Storage Arrays

Each storage array should be assigned a unique up to 30-character alphanumeric name. A name can consist of letters, numbers, and the special characters underscore (_), dash (–), and pound sign (#). No other special characters are allowed.

To rename a selected storage array:

1Perform one of these actions:

•In the AMW Setup tab, select Rename Storage Array.

•In the EMW Devices tab Tree view, select Edit→ Rename.

•In the EMW Devices tab Table view, select Edit→ Rename.

•In the EMW Devices tab Tree view, right-click on the desired array icon and select Rename.

The Name/Rename Storage Arrays dialog appears.

2Select the relevant storage array from the Select storage array table.

If you do not know the name or physical location of the storage array, click Blink. After locating the storage array, click OK to turn off the LEDs.

The name of the storage array appears in the Storage array name.

3In Storage array name, type the new name of the storage array. If applicable, add a comment for the storage array in Additional comment.

4Click Apply.

A message is displayed warning you about the implications of changing the storage array name.

5Click Yes.

The new storage array name appears in the Select storage array table.

6Repeat step 2 through step 4 to name or rename additional storage arrays.

NOTE: Avoid arbitrary names or names that might lose meaning in the future.

68

Configuration: About Your Storage Array