Dell MD3200, MD3220 Using the Mappings Tab, Defining a Host, Select Mappings→ Define→ Host

•Change the host port identifier alias or user label.

•Move or associate a host port identifier to a different host.

•Replace a host port identifier with a new host port identifier.

•Manually activate an inactive host port so that the port can gain access to host specific or host group specific LUN mappings.

•Set the host port type to another type.

•Move a host from one host group to another host group.

•Remove a host group, a host, or a host port identifier.

•Rename a host group, or a host.

Using the Mappings Tab

In the mappings tab you can:

•Define hosts and hosts groups

•Add mappings to the selected host groups

For more information, see the PowerVault Modular Disk Storage Manager online help topics.

Defining a Host

You can use the Define Host Wizard in the AMW to define a host for a storage array. Either a known unassociated host port identifier or a new host port identifier can be added.

NOTE: A user label must be specified before the host port identifier may be added (the add button is disabled until one is entered).

To define a host:

1In the AMW, select the Mappings tab and select the appropriate storage array.

2Perform one of the actions:

•Select Mappings→ Define→ Host.

•Select the Setup tab, and click Manually Define Hosts.

84

Configuration: About Your Host