Dell MD3220, MD3200 Moving a Host to a Different Host Group, Adding a Host to a Host Group

•Right-click the storage array or the Default Group, and select Define→ Host Group from the pop-up menu.

4Type the name of the new host group in Enter new host group name.

5Select the appropriate hosts in the Select hosts to add area.

6Click Add.

NOTE: To remove hosts, select the hosts in the Hosts in group area, and click Remove.

7Click OK.

The host group is added to the storage array.

Adding a Host to a Host Group

You can add a host to an existing host group or a new host group using the Define Host Wizard. For more information, see "Defining a Host" on page 84.

You can also move a host to a different host group. For more information, see "Moving a Host to a Different Host Group" on page 87.

Removing a Host From a Host Group

You can remove a host from the Topology pane on the Mappings tab of the Array Management Window. For more information, see "Removing a Host Group" on page 88.

Moving a Host to a Different Host Group

To move a host to a different host group:

1In the AMW, select the Mappings tab, select the host node in the Topology pane.

2Perform one of these actions:

•Select Mappings→ Move.

•Right-click the host node, and select Move from the pop-up menu. The Move Host dialog appears.

3In the Select host group, select the host group to which you want to move the host.

The Move Host Confirmation dialog appears.

Configuration: About Your Host

87