Dell MD3200, MD3220 Using Go To, Select Find all free capacity nodes, Click Find Next, 228

6To search for all nodes based on their virtual disk capacity, perform these steps:

a Select Find all virtual disks with capacity. b Type the capacity in the GB box.

c Specify that the capacity to be matched is less than, equal to, or greater than the capacity entered in the GB box.

d Go to step 8.

7To search for all Free Capacity nodes with a particular capacity, perform these steps:

NOTE: This option is not available when the Search by name option is selected or from the Mappings tab. You must cancel the selection of the Search by name option to use this option.

aSelect Find all free capacity nodes.

bType the capacity in the GB box.

cSpecify that the free capacity to be matched is less than, equal to, or greater than the capacity entered in the GB box.

dGo to step 8.

8Click Find Next.

To see every node that matches the criteria, click Find Next repeatedly. If no matches are found, the Search Failed dialog appears. Click OK, and re- enter the search criteria.

9To close the dialog, click Cancel.

To continue searching for nodes with the same criteria after the Find dialog has been closed, press F3.

Using Go To

Use the Go To option to quickly jump to an associated snapshot repository virtual disk, snapshot virtual disk, source virtual disk, or target virtual disk. These virtual disks appear in the Logical pane of the Logical tab.

The Go To option is available only if the Snapshot premium feature or the Virtual Disk Copy premium feature is enabled or if snapshot virtual disks or virtual disk copies currently exist on the storage array. The Go To option is not accessible from the Mappings tab of the Array Management Window.

228

Troubleshooting: Your Storage Array Software