Dell 720H2C appendix Using a Media Card Reader Optional, Mmc/Rs-Mmc

•Music MP3 files can be played only on MP3 players or on computers that have MP3 software installed.

•Use a blank CD-RW to practice CD recording until you are familiar with CD recording techniques. If you make a mistake, you can erase the data on the CD-RW and try again. You can also use blank CD-RWs to test music file projects before you record the project permanently to a blank CD-R.

•You cannot create audio DVDs with Roxio Creator.

•Commercially available DVD players used in home theater systems may not support all available DVD formats. For a list of formats supported by your DVD player, see the documentation provided with your DVD player or contact the manufacturer.

•Commercially available BD players used in home theater systems may not support all available BD formats. For a list of formats supported by your BD player, see the documentation provided with your BD player or contact the manufacturer.

•See the Roxio website at www.sonic.com for additional information.

Using a Media Card Reader (Optional)

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

Use the media card reader to transfer data directly to your computer.

The media card reader supports the following memory types:

•xD-Picture card

•SmartMedia card (SMC)

•CompactFlash card Type I and II (CF I/II)

•MicroDrive card

•SecureDigital card (SD)

•MiniSD card

•MultiMediaCard (MMC)

•Reduced-size MultiMediaCard (RS-MMC)

•Memory Stick (MS/MS Pro/MS Duo/MS Pro Duo)

For information on installing a media card reader, see Installing a Media Card Reader.

1 xD-Picture card and	2 Memory Stick	3 Secure Digital card
SmartMedia Card (SMC)	(MS/MS Pro/MS	(SD/miniSD)/MultiMedia-Card
	Duo/MS Pro Duo)	(MMC/RS-MMC)

4CompactFlash card Type I and II (CF I/II) and MicroDrive card

1.Inspect the media card to determine the proper orientation for insertion.

2.Slide the media card into the appropriate slot of the media card reader until it is completely seated in the connector.

If you encounter resistance, remove the card, check for proper orientation, and then try again.