Tips and information for using the Microsoft Windows XP operating system

Instructions for removing and installing parts, including memory, cards, drives, the microprocessor, and the battery

Information for troubleshooting various computer problems

Instructions for using the Dell Diagnostics and reinstalling drivers

Information on how to contact Dell

You can access the User’s Guide from your hard drive or the Dell Support website at support.dell.com.

Removing the Computer Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer.

1Follow the procedures in "Before You Begin" in your User’s Guide.

NOTICE: Opening the computer cover while the computer is running could result in a shutdown without warning and a loss of data in open programs. The computer cooling system cannot function properly while the cover

is removed.

2If you have installed a security cable, remove it from the security cable slot.

NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk top space.

NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the computer or the surface on which it is resting.

3Lay your computer on a flat surface with the cover facing up.

30

Quick Reference Guide

Page 30
Image 30
Dell MD506 manual Removing the Computer Cover