1 | 2 | 3 | 4 |
5
| 8 |
| 7 |
| 6 |
1 | screws (6) | 2 | display cable | 3 | display cable |
4 | 5 | antenna cables | 6 | standby switch | |
7 | display cable connector on | 8 | display cable channel |
|
|
| system board |
|
|
|
|
8Lift the display up and away from the computer.
NOTICE: The standby switch is fragile and easily broken. Avoid knocking the switch when removing and replacing the display.
When you replace the display, ensure that the display cable is lying flat in the display cable channel and securely tucked underneath the tabs.
Also, ensure that the antenna cables are not twisted and that they are lying flat in the antenna cable clip.
106