9.If applicable, install the front bezel.

Figure 8. Removing and Installing the Optical Drive

 

 

1.

data cable

2.

power cable

3.

optical drive

4.

metal standoffs (2)

5.release latch

Installing The Optical Drive

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.If installed, remove the front bezel.

2.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

3.Open the system.

Remove the optical-drive blank, if applicable.

32

Page 32
Image 32
Dell R220 owner manual Installing The Optical Drive, Removing and Installing the Optical Drive