6.Install the cooling shroud.
Figure 15. Removing and Installing a Cooling Fan |
| |
1. | cooling fans (3) | 2. fan power cable connector |
3. | 4. fan Mylar | |
5.fan 3 bracket
Installing A Cooling Fan
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.Open the system.
3.Remove the cooling shroud.
4.Orient the fan module so that the side with the power cable faces the back of the system.
NOTE: Install fan 3 if you are installing an expansion card. Remove the fan Mylar from the fan 3 slot and install fan 3. Retain the removed fan Mylar for future use.
5.Lower the fan into the
NOTE: When aligned correctly, the fan cable is on the right of the fan.
6.Connect the fan power cable to the power cable connector on the system board.
7.Replace the cooling shroud.
8.Close the system.
44
