Dell V715W manual Editing photos using the printer control panel, You can

8Press the Color/Black button to set a color or black-and-white print.

When you select color or black-only printing, the light near your choice comes on.

9Press .

Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Editing photos using the printer control panel

1Load photo paper.

2Insert a memory card or flash drive.

If document files and image files are stored on the memory device, then press to select Photos.

3From the printer control panel, press to select Select and Print.

4Press the left or right arrow button to select the layout of the photo you want to print, and then press .

5Press the left or right arrow button to select a photo for editing and printing.

6Press the up or down arrow button to scroll to , and then press .

From here

Brightness

Crop

Auto Enhance

Reduce Red Eye

Rotate

Colorized Effect

Frames

You can

Adjust the brightness of a photo.

Crop a photo.

Enhance a photo automatically.

Reduce the red-eye effect caused by light reflection.

Rotate a photo in 90-degree increments clockwise or counterclockwise.

Select whether to print a photo in black and white, sepia, antique brown, or antique gray.

Select a frame for the photo.

7Press the arrow buttons to make your selections.

8Press the up or down arrow button to scroll to , and then press .

9Press the up or down arrow button to scroll to , and then press .

10If you want to adjust the print settings:

aPress again.

bPress the arrow buttons to make your selections.

cPress to save your selections.

dPress the up or down arrow button to scroll to Continue, and then press .

11Press the Color/Black button to set a color or black-and-white print.

When you select color or black-only printing, the light near your choice comes on.

12Press .

Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Printing

37