Delta DVPEN01-SL Application Examples, Setting up IP and Communicating through WPLSoft

Ethernet Communication Module DVPEN01-SL

Check “Default Setting” box and click on “Yes”.

Note:

If you set up DVPEN01-SL by RS-232, you can return the setting to default setting whether the password is locked or not. It takes approximately 10 seconds to return to default setting, so DO NOT switch off the power within the 10 seconds.

6Application Examples

6.1Setting up IP and Communicating through WPLSoft

Application

Network requirement

Setting up network parameters of DVPEN01-SL directly on the PC.

(1)IP of PC executing WPLSoft: 192.168.0.3

(2)Subnet mask: 255.255.255.0; Gateway: 192.168.0.1

(3)IP of DVPEN01-SL: 192.168.0.4

(4)Connect the PC and DVPEN01-SL by RJ-45 cable. Note: Both PC and DVPEN01-SL have to adopt static IP.

1. The connection

DVPEN01 DVP-PLC

PC

2. Open "Communication Setting” in WPLSoft.

30 DVP-PLC Operation Manual