Modbus TCP Remote I/O Communication Module
Check the box to enable IP filter.
2.Begin IP address:
Start IP addresses allowed to establish connection. Max. 8 IPs are allowed.
3.End IP address:
End IP addresses allowed to establish connection. Max. 8 IPs are allowed.
6.7 Smart PLC Setting:
IF-THEN
1.Enable:
Check the box to enable
2.IF:
For the trigger condition, you can select bit devices RX, RY, C, T, RT or word device RCR and set them to ON, OFF, Rising, Falling, >, <, =, <>, >= or <=. The trigger condition can be AND or OR. When the device is a register, the allowed trigger range will be
3.THEN:
For the execution, you can select bit devices RY, C, T, RT or word device RCR and set them to Set, Reset, Toggle or set up a value for them. Please refer to the explanations on IF#13 ~ IF#24. When the device is a register, the allowed trigger range will be
4.Add, Modify, Clear, Delete:
All the settings above can be added to the
5.Up, Down:
24 |