ENGLISH

Basic Operation

2 Input mode displaySTANDARD

 

• In the AUTO mode

 

Depending on the input signal.

• In the DIGITAL PCM mode

Basic Operation

STANDARD

DIRECT STEREO

ENTER

SURROUND

PARAMETER

CURSOR F
CURSOR G

•In the DIGITAL DTS mode

•In the ANALOG mode

DIRECT/STEREOSURROUND PARAMETER SELECT

Surround

Playing audio sources (CDs and DVDs) 2-channel playback modes

•The AVR-1306 is equipped with 2-channel playback modes exclusively for music.

•Select the mode to suit your tastes.

Dolby Pro Logic II mode1 Press the STANDARD button to select the Dolby Pro Logic II mode.

• The Dolby Pro Logic II indicator lights.

2Input signal display

• DOLBY DIGITAL

 

 

 

 

 

 

 

 

 

The

“DIGITAL” indicator lights

 

 

 

 

 

 

 

 

 

• DTS

 

 

when digital signals are being input

 

 

properly. If the “DIGITAL” indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

does not light, check whether the

 

 

 

 

 

 

 

 

 

Digital In Assignment setup (

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

page 15) and connections are correct

• PCM

 

 

and

whether the component’s

 

 

 

 

power is turned on.

2DIRECT mode

Use this mode to achieve good quality 2-channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound.

Press the DIRECT/STEREO button on the main unit or the DIRECT button on the remote control unit to select the DIRECT mode.

2STEREO mode

Use this mode to adjust the tone and achieve the desired sound while watching images.

Lights

The mode switches as shown below each time the button is pressed.

DOLBY PLII DTS NEO:6

2 Play a program source.

For operating instructions, refer to the manuals of the respective components.

3 Press the SURROUND PARAMETER button to select the surround parameter mode.

 

 

Press the DIRECT/STEREO button on the main unit

NOTE:

 

or the STEREO button on the remote control unit to

• The “DIGITAL” indicator will light when playing CD-ROMs

 

containing data other than audio signals, but no sound will

 

select the STEREO mode.

be heard.

 

 

 

 

 

 

 

19

ENGLISH