Denon AVR-1306 TP search, RDS search, PTY search, RT (Radio Text), 2 Press the RT button, Set the input source to “TUNER”, 1 Set the input source to “TUNER”

Set the input source to “TUNER”.

Basic Operation

RDS search

Use this function to automatically tune to FM stations that provide the RDS service.

1 Set the input source to “TUNER”.

(Main unit) (Remote control unit)

2 Press the RDS button until “RDS SEARCH” appears on the display.3 Press the PRESET • (+) or ª (–) button.

• The search for RDS stations begins automatically.

If no RDS stations are found with the above operation, all the reception bands are searched.

When a broadcast station is found, that station’s name appears on the display.

4 To continue searching, repeat step 3.

If no RDS station is found when all the frequencies have been searched, “NO RDS” is displayed.

PTY search

Use this function to find RDS stations broadcasting a designated program type (PTY).

For a description of each program type, refer to “Program Type (PTY)”.

1

2 Press the RDS button until “PTY SEARCH” appears on the display.

3 Watching the display, press the PTY button to call out the desired program type.

4 Press the PRESET • (+) or ª (–) button.

• PTY search begins automatically.

If there is no station broadcasting the designated program type with the above operation, all the reception bands are searched.

The station name is displayed on the display after searching stops.

5 To continue searching, repeat step 4.

If no station broadcasting the designated program type is found when all the frequencies have been searched, “NO PROGRAMME” is displayed.

ENGLISH

Basic Operation

TP search

Use this function to find RDS stations broadcasting traffic programs (TP stations).

1 Set the input source to “TUNER”.

2 Press the RDS button until “TP SEARCH” appears on the display.

3 Press the PRESET • (+) or ª (–) button.

• TP search begins automatically.

If no TP station is found with the above operation, all the reception bands are searched.

The station name is displayed on the display after searching stops.

4 To continue searching, repeat step 3.

If no other TP station is found when all the frequencies have been searched, “NO PROGRAMME” is displayed.

RT (Radio Text)

“RT” appears on the display when radio text data is received.

1 Set the input source to “TUNER”.

2 Press the RT button.

While receiving an RDS broadcast station, the text data broadcast from the station is displayed.

To turn the display off, press the RT button again.

If no text data is being broadcast, “NO TEXT DATA” is displayed.

30

ENGLISH