Denon AVR-1306 Auto tuner presets, / 90.1 MHz, 522 / 603 / 999 / 1404 / 1611 kHz, / 90.1 / 90.1 MHz, MHz

Basic Operation

INPUT SELECTOR PRESET •

POWER

ON/STANDBY BAND TUNING

Listening to the radio

Auto preset memory

This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory.

Hold the PRESET • button and press the POWER switch on the main unit.

•The unit automatically begins searching for FM broadcast stations.

When the first FM broadcast station is found, that station is stored in the preset memory at channel A1.

Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations. Channel A1 is tuned in after the auto preset memory operation is completed.

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

•To interrupt this function, press the ON/STANDBY switch.

TUNER TUNING

MODE BAND

2DEFAULT SETTINGS

Auto tuner presets

A1	~ A8	87.5	/ 89.1 / 98.1 / 108.0 / 90.1 / 90.1 /
		90.1	/ 90.1 MHz
B1	~ B8	522 / 603 / 999 / 1404 / 1611 kHz,
		90.1	/ 90.1 / 90.1 MHz
C1	~ C8	90.1	MHz
D1	~ D8	90.1	MHz
E1	~ E8	90.1	MHz
F1	~ F8	90.1	MHz
G1	~ G8	90.1	MHz

ENGLISH

Basic Operation

Auto tuning

1 Set the input source to “TUNER”.

(Main unit) (Remote control unit)

2 Watching the display, press the BAND button to select the desired band (AM or FM).

3 Press the MODE button to set the auto tuning mode.

Lights

A1 FM 87 . 50MHz

4 Press the TUNING (+) or (–) button.

Automatic searching begins, then stops when a station is tuned in.

•When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.

28

ENGLISH