Basic Operation

DEFAULT setting

DEFAULT Y/N

YES Y/NNO

Select “YES” to reset to the factory defaults.

5 Press the ENTER button to finish the surround parameter mode.

When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

2Operating the surround mode and the surround parameters from the main unit’s panel

1 Turn the SELECT knob to select the surround mode.

When turned clockwise:

DIRECT STEREO DOLBY PRO LOGIC II

MONO MOVIE 5CH STEREO DTS NEO:6

ROCK ARENA JAZZ CLUB VIDEO GAME

VIRTUAL SURROUND MATRIX

When turned counterclockwise:

DIRECT STEREO DOLBY PRO LOGIC II

MONO MOVIE 5CH STEREO DTS NEO:6

ROCK ARENA JAZZ CLUB VIDEO GAME

VIRTUAL SURROUND MATRIX

To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button, then operate the selector.

2 Press and hold in the SURROUND PARAMETER button to select the parameter you want to set.

The parameters which can be set differ for the different surround modes are displayed. (Refer to “Surround modes

and parameters” ( page 40).)

3 Display the parameter you want to adjust, then turn the SELECT knob to set it.

ENGLISH

Basic Operation

2Surround parameters rROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.

DELAY TIME:

The delay time can be set within the range of 0 to 110 ms only in the matrix mode.

TONE CONTROL:

This can be set individually for each surround mode except

DIRECT.

When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

26

ENGLISH