Denon AVR-1306 methods, ENGLISH, Surround, ( page 40), qDolby Digital, Dolby Pro Logic, Dolby Pro Logic, wDolby Pro Logic, [1] Dolby Surround, Dolby Surround logo symbol:

Additional Information

Surround

The AVR-1306 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.

[1] Dolby SurroundqDolby Digital

Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.

Dolby Digital consists of up to “5.1” channels – front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects (the Low Frequency Effects –LFE– channel, also called the “.1” channel, containing bass frequencies of up to 120 Hz). Unlike the analog Dolby Pro Logic format, Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.

2Dolby Digital and Dolby Pro Logic

Comparison of home	Dolby Digital	Dolby Pro Logic
surround systems
No. of recorded	5.1 ch	2 ch
channels (elements)
No. of playback	5.1 ch	4 ch
channels
Playback channels	L, R, C, SL, SR, SW	L, R, C, S
(max.)		(SW – recommended)
	Digital discrete	Analog matrix
	processing Dolby
Audio processing		processing Dolby
	Digital encoding /
		Surround
	decoding
High frequency
playback limit of	20 kHz	7 kHz
surround channel

2Dolby Digital compatible media and playbackmethodsSymbol indicating Dolby Digital compatibility:

The following are general examples. Also refer to the player’s operating instructions.

Media	Dolby Digital output	Playback method
	terminals		(reference page)
	Coaxial Dolby Digital	Set the input mode to
LD (VDP)	RF output terminal		“AUTO”
	1	(	page 18, 19).
	Optical or coaxial	Set the input mode to
	digital output
DVD			“AUTO”
	(same as for PCM)
		(	page 18, 19).
	2
Others	Optical or coaxial	Set the input mode to
(satellite broadcasts,	digital output		“AUTO”
CATV, etc.)	(same as for PCM)	(	page 18, 19).

1: Please use a commercially available adapter when connecting the Dolby Digital RF output terminal of the LD player to the digital input terminal.

Please refer to the instruction manual of the adapter when making connection.

2: Some DVD digital outputs have the function of switching the Dolby Digital signal output method between “bit stream” and “(convert to) PCM”. When playing in Dolby Digital surround on the AVR-1306, switch the DVD player’s output mode to “bit stream”. In some cases players are equipped with both “bit stream + PCM” and “PCM only” digital outputs. In this case connect the “bit stream + PCM” terminals to the AVR-1306.

wDolby Pro Logic II

•Dolby Pro Logic II is a new multi-channel playback format developed by Dolby Laboratories using feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits.

•Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround ( ) but also regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve surround sound.

ENGLISH

Additional Information

•Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited, Dolby Pro Logic II offers a wider band range (20 Hz to 20 kHz or greater). In addition, the surround channels were monaural (the surround left and right channels were the same) with previous Dolby Pro Logic, but with Dolby Pro Logic II they are played as stereo signals.

•Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding

( page 40). Sources recorded in Dolby Surround

•These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology.

•Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassette tapes, as well as for stereo broadcast signals from FM radio, TV, satellite broadcasts and cable TV.

•Decoding these signals with Dolby Pro Logic II makes it possible to achieve multi-channel surround playback. The signals can also be played on ordinary stereo equipment, in which case they provide normal stereo sound.

•There are two types of DVD Dolby surround recording signals. q 2-channel PCM stereo signals

w 2-channel Dolby Digital signals

•When either of these signals is input to the AVR-1306, the surround mode is automatically set to Dolby Pro Logic II when the DOLBY/DTS SURROUND mode is selected.

2Sources recorded in Dolby Surround are indicated with the logo symbol shown below

Dolby Surround logo symbol:

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

38

ENGLISH