Denon AVR-1910 Connecting Devices not Equipped with HDMI terminals

ENGLISH

Getting							Connecting devices
				Connections			n Connecting to a device equipped with a DVI-D
Started
				devices and output to 1 TV.			When an HDMI/DVI conversion cable (sold separately) is used, the
				The AVR-1910 allows connection of inputs from up to 4 HDMI			terminal
							HDMI video signals are converted to DVI signals, allowing connection
Connections
							to a device equipped with a DVI-D terminal.
				DVD	)%.*
							NOTE
				Player	065
							• No sound is output when connected to a device equipped with a
				Blu-ray		)%.*	DVI-D terminal. Also make the audio connections.
Settings
		Disc Player				065	• Signals cannot be output to DVI-D devices that do not support
							HDCP.
							• Depending on the combination of devices, the video signals may not
		SAT/CABLE				)%.*
Playback							be output.
				Tuner		065
							n Settings related to HDMI connections
	Digital Video					)%.*
					Set as necessary. For details, see the respective reference pages.
Multi-			Recorder				065
							Input terminal assignment (vpage 33)
Zone							Set this when changing the input sources of the different terminals.
							HDMI Setup (vpage 28)
				Monitor	)%.*
Remote				(TV)	*/		Make these settings related to HDMI input/output signals.
							• Auto Lip Sync
							• HDMI Audio Out
Control				product) for connection to the HDMI connector. Normal playback			• HDMI Control
							• Power Off Control
				• Use a cable on which the HDMI logo is indicated (a certified HDMI			• Standby Source
Information				may not be possible when using a cable other than one on which the			NOTE
				HDMI logo is indicated (a non-HDMI-certified product).
							The audio signals output from the HDMI connectors are only the
			• When the AVR-1910 is connected to other devices with HDMI cables,
							HDMI input signals.
				also connect the AVR-1910 and TV using an HDMI cable.
			• When a device supporting Deep Color signal transfer is connected,
Troubleshooting				use a cable compatible with HDMI ver.1.3a.
			• Video signals are not output if the input video signals do not match
				the monitor’s resolution. In this case, switch the Blu-ray Disc player /
				DVD player’s resolution to a resolution with which the monitor is
				compatible.
Specifications				NOTE
				• If the menu “HDMI Audio Out” setting (vpage 28) is set to “AMP”,
				the sound may be interrupted when the monitor’s power is turned
				off.
			• The audio signal from the HDMI output terminal (sampling
				frequency, number of channels, etc.) may be limited by the HDMI
				audio specifications of the connected device regarding permissible
				inputs.

Connecting Devices not Equipped with HDMI terminals

Monitor (TV)

•Select the terminal to use and connect the device.

•For video connections, see “Converting input video signals for output (Video Conversion Function)” (vpage 9).

For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.

Monitor (TV)

	"6%*0			7*%&0
015*$"-		7*%&0	$0.10/&/5 7*%&0
065		*/	*/
			: 1# 13

The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions.

13